1. Purpose To enhance the safe use of lifting belts and slings.2. Covers all lifting belts and slings used in the production workshop and logistics area.3. Rights and Responsibilities 3.1 The production department is responsible for the disposal of scrapped lifting belts and slings and the issuance of new lifting belts.3.2 The user of the lifting belt is responsible for the daily inspection of the lifting belt and slings.3.3 The team leader is responsible for applying for scrapping of damaged lifting belts and slings and receiving new lifting belts.3.4 The Safety and Environmental Protection Department is responsible for supervising the safe use of lifting belts and slings. 4. Definition of lifting belts: Generally made of high-strength polyester filament, it has multiple advantages such as high strength, wear resistance, oxidation resistance, and UV resistance. At the same time, it is soft, non-conductive, non-corrosive (no harm to the human body), and is widely used in various fields. Slings: the connection between the crane or the main body of the hoisted object and the hoisted object also covers slings and hoists. collectively.5. Operation process (under improvement) 6. Management content 6.1 Integration

Since July, high temperature red warnings have been sounding continuously, the weather has entered a continuous 'barbecue' mode, and the heat is unbearable.On July 20, Futai workshop received a shipment of a large number of sling products.In order to avoid continuous work during high-temperature periods, some employees arrived at the factory early in the morning and started the day's stocking and delivery.In the cab, beads of sweat were seen falling down their cheeks, and their clothes were soaked with sweat and had never been dry. Outside the warehouse, they were tossed between the warehouse and the truck with the scorching sun above their heads.The continuous high temperature has increased the difficulty of delivery, but their work progress has not slowed down. They cooperated with the delivery personnel to load truckloads of sling products into trucks.Forward, fork pallets, lift, reverse... They expertly turned the steering wheel in their hands and shuttled back and forth in the warehouse tirelessly.Faced with the heavy delivery task, Futai employees joined forces and took the initiative to share the delivery task. At the same time, they sent them water and heatstroke protection.

Lifting slings are important auxiliary tools for lifting and handling operations. They mainly include wire slings, slings, hooks, steel plate clamps, etc.There are many types of slings, the use environment is complex and changeable, there are many people using them and their quality is uneven, there are many dangerous factors, and they are very harmful.If used improperly or poorly managed, accidents can easily occur.In view of the sling breakage accidents that have occurred in some companies in recent years, combined with years of safety management practices, the reasons for the sling breakage were carefully analyzed, and preventive countermeasures were proposed to ensure the safety of the sling.1. Analysis of the causes of fracture accidents 1.The manufacturing of slings is not standardized. At present, the slings used by enterprises are divided into two parts: those produced by professional factories and those made by enterprises.The poor quality of products produced by professional sling manufacturers is an important cause of accidents.Some sling manufacturers do not produce and inspect products in accordance with national standards.For example: In 1999, a factory purchased 8

How many aspects does the inspection of slings include?1. Initial sling inspection. Before using the newly purchased, homemade or repaired slings and riggings, the user unit should have full-time personnel inspect them in accordance with the relevant standards of the slings to determine whether they can be put into use.2. Frequent inspection of slings. Daily users should conduct regular visual inspections of slings and riggings (including before use and between uses). When defects that affect safe performance are found, use should be stopped and Inspect according to regular inspection requirements.3. Regular inspection of slings shall be carried out by the user. The user shall determine a reasonable periodic inspection cycle based on the frequency of use of the slings and rigging, the severity of the working conditions, or the experience and service life of the slings and riggings, and shall appoint full-time personnel to conduct inspections according to the slings. Comply with the rigging safety technical requirements, and conduct a comprehensive inspection with testing instruments to make a safety evaluation.

Precautions, steps and methods for wire rope slings • When using wire ropes, devices and measures should be taken to prevent the rotation of the wire ropes and slings.It is strictly forbidden to overload the wire rope during use and should not be subject to impact. When bundling or lifting required objects, be careful not to make the wire rope directly contact with the sharp edges of the object, and place sacks on the contact points. Pads are used to prevent the sharp corners of objects from damaging the wire rope and causing equipment and personal accidents.• If a large amount of oil is found to squeeze out from between the strands of the steel wire rope during work, this is a precursor to the wire rope breaking. The crane should be stopped immediately to find out the cause.When storing the wire rope, clean the dirt on the wire rope according to the above method and lubricate it, then coil it and store it in a dry place. Place wooden boards or sleepers under the wire rope and check it regularly.• When using wire rope clamps for fastening, horse-riding clamps should be used as much as possible. At the same time, the inner distance of the 'U'-shaped bolts should be equal to the diameter of the wire rope.

Futai is working together. Recently, with the end of the Dragon Boat Festival holiday, the company has received a number of orders one after another. Under the arrangements of Futai leaders, employees have worked together to ensure that the production orders are successfully completed.The order for slings received this time was large and the delivery cycle was short. Faced with difficulties such as short construction period and heavy tasks, production was urgent.In order to ensure the smooth completion of production tasks, Futai Company made overall arrangements and rational dispatch, requiring all managers to go to the front line of the workshop and engage in intense work.The employees in the workshop worked at full capacity, worked overtime, gave up their rest time, and stayed at their posts day and night, giving full play to the spirit of Futai employees who are not afraid of difficulties, dare to fight, are good at tackling difficulties, and bravely shoulder heavy responsibilities.At present, all production tasks are being carried out in an orderly manner. All cadres and workers of Futai Company are confident and determined to successfully complete various production order tasks and establish a good reputation for Futai.The picture above shows the sling being processed. The picture below shows the sling waiting to be packed.