Views: 246 Author: Site Editor Publish Time: 2022-10-11 Origin: Site
A. The spreader should be stored in a ventilated, dry and clean factory building and should be kept by full-time safety personnel. It should not be exposed to strong and weak acids, strong and weak alkalis, industrial salts, chemical gases, and exposure to the sun is strictly prohibited.
B. After using the spreader, use cotton gauze and organic solvent or industrial kerosene to remove stains on the surface and place the spreader frame.
C. Pin holes of special-shaped parts, serial pin bars, sleeves, main plate beams, clamp hooks, clamps, polyurethane protection for contact pressure plates, bolts, bushings, side-pull eye screws, lifting rings, shackles, butterfly buckles, hanging chains, Main parts and accessories such as slings must be inspected every shift. If deformation, serious wear, safety devices falling off, cracks, missing dents, etc. are found, use should be stopped.The surface of special-shaped spreaders and accessories should be lubricated and protected with anti-rust grease regularly.
D. It is strictly forbidden to overload when using side-pull rotating lifting eye screws. The working surface must be flat so that the bottom surface of the screw is in full contact with the working surface. There must be no gap in the middle. No padding must be installed between the bottom surface of the screw and the working surface. The threads must be regularly checked. Grease lubrication protection.
E. If plastic deformation is found during use of the hanging chain and the elongation exceeds 5% of the original size, use should be stopped. After normal use, attached foreign matter should be removed and greased for protection.
F. If the lifting belt is found to have delamination, serious wear, cuts, etc. at the seams, stop using it.
G. It is strictly forbidden to drag the sling on the ground. It should be picked up as a set or transported on a trolley. The spreader should not be left hanging heavy objects for a long time. It should be smoothed out after use and the spreader rack should be placed.