Overview of high-strength fiber flat lifting belts
The maximum load range of the flat lifting belt is: 0-30m and the length range is 1-100 meters.Flat slings are made of 100% PES through braided stitching.And the two ends of the sling can use reinforced eyelets or metal accessories to increase strength.
Flat slings, like flexible round slings, also have their own unique advantages:
1. It can be divided into single layer and multi-layer, and there are various stitching methods.
2. The size can be determined according to the user's requirements.(0-30 tons load, length range 1-100 meters).
3. The bearing surface is wide, which can reduce the pressure on the load surface.
4. It will not cause damage when hoisting objects with smooth and delicate outer surfaces.
5. Anti-wear protective cover and anti-cut protective cover can be attached.
6. The safety factor ratio is 6:1.
7. It is equipped with a unique label and uses international standard colors to distinguish the carrying tonnage. Even if the sling is damaged, it is easy to identify.
8. The surface can be hardened by PU to enhance wear resistance.
9. Lightweight and soft, easy to use in small spaces.
10. Comply with Chinese industry standard JB/T8521-1997.
11. The elastic elongation of the sling is small, <3% under working load and <10% under breaking load.
12. The operating temperature range is -40℃-100℃.
★Flat slings have superior performance: they can provide wide, flatSmooth load-bearing surface, especially when lifting objects with soft surfacesDon't apply.If necessary, it can also be equipped with a protective cover with wider straps.To use, because there is no metal contact, for the hoisted objectThe smooth and painted surface of the body causes minimal damage.
★Flat slings have higher safety.The weight is only the same20% of the loaded chain, safer and less likely to cause damage during useHarm to human body.
★Can be used in dangerous and explosive environments without causinginto a spark.In addition, the low extensibility of the flat belt can reduce the lifting effort.Avoid the beating of the hoisted objects in the industry to avoid impact damage.sameSlings are dye-coded to provide easy confirmation of correct loadThis method fully facilitates hoisting users.
★Flat slings have higher protection against wear and damage.Among the slings used in general hoisting, due to the flat slingIts superior performance makes it have a long working life, but at the same timeThe correct protective cover must also be used during hoisting operations to ensurePrevent the lifting belt from being cut by sharp objects or lifting objects.
★The daily maintenance of the flat lifting belt is very simple.except occasionallyThe sling does not require any cleaning other than cleaning it in water with detergent.Maintenance, lifting straps have very good resistance to corrosion and areHydrocarbonic acid and most chemical solutions or chemicals have a highresistance, but for strong acid or alkali, the lifting belt may because some damages.
Technical parameters
Product ID | load lbs | Approximate thickness in | Approximate width (in) | Minimum length ft | Maximum length ft | Annular length in | Weight (lbs/ft) | ||||
5:1 | 6:1 | 7:1 | 5:1 | 6:1 | 7:1 | ||||||
FTB08-02 | 4409.25 | 0.59 | 0.98 | 0.98 | 1.18 | 0.04 | 3.94 | 15.75 | 0.75 | 0.99 | 1.08 |
FTB08-04 | 8818.49 | 0.59 | 1.97 | 1.97 | 2.36 | 0.05 | 3.94 | 19.69 | 1.41 | 1.72 | 1.79 |
FTB08-06 | 13227.74 | 0.59 | 2.95 | 2.95 | 3.54 | 0.05 | 3.94 | 23.62 | 2.29 | 2.60 | 2.73 |
FTB08-08 | 17636.98 | 0.59 | 3.94 | 3.94 | 4.72 | 0.06 | 3.94 | 27.56 | 2.95 | 3.09 | 3.66 |
FTB08-10 | 22046.23 | 0.59 | 4.92 | 4.92 | 5.91 | 0.06 | 3.94 | 31.50 | 3.64 | 3.79 | 4.48 |
FTB08-12 | 26455.47 | 0.59 | 5.91 | 5.91 | 7.09 | 0.07 | 3.94 | 35.43 | 4.30 | 4.48 | 5.09 |
FTB08-16 | 35273.96 | 0.59 | 7.87 | 7.87 | 9.45 | 0.08 | 3.94 | 37.40 | 4.98 | 5.73 | 6.11 |
FTB08-20 | 44092.45 | 0.59 | 9.84 | 9.84 | 11.81 | 0.09 | 3.94 | 39.37 | 6.55 | 7.32 | 7.83 |
FTB08-24 | 52910.94 | 0.59 | 11.81 | 11.81 | - | 0.09 | 3.94 | 39.37 | 8.51 | 9.26 | 9.79 |
Overview of high-strength fiber flat lifting belts
The maximum load range of the flat lifting belt is: 0-30m and the length range is 1-100 meters.Flat slings are made of 100% PES through braided stitching.And the two ends of the sling can use reinforced eyelets or metal accessories to increase strength.
Flat slings, like flexible round slings, also have their own unique advantages:
1. It can be divided into single layer and multi-layer, and there are various stitching methods.
2. The size can be determined according to the user's requirements.(0-30 tons load, length range 1-100 meters).
3. The bearing surface is wide, which can reduce the pressure on the load surface.
4. It will not cause damage when hoisting objects with smooth and delicate outer surfaces.
5. Anti-wear protective cover and anti-cut protective cover can be attached.
6. The safety factor ratio is 6:1.
7. It is equipped with a unique label and uses international standard colors to distinguish the carrying tonnage. Even if the sling is damaged, it is easy to identify.
8. The surface can be hardened by PU to enhance wear resistance.
9. Lightweight and soft, easy to use in small spaces.
10. Comply with Chinese industry standard JB/T8521-1997.
11. The elastic elongation of the sling is small, <3% under working load and <10% under breaking load.
12. The operating temperature range is -40℃-100℃.
★Flat slings have superior performance: they can provide wide, flatSmooth load-bearing surface, especially when lifting objects with soft surfacesDon't apply.If necessary, it can also be equipped with a protective cover with wider straps.To use, because there is no metal contact, for the hoisted objectThe smooth and painted surface of the body causes minimal damage.
★Flat slings have higher safety.The weight is only the same20% of the loaded chain, safer and less likely to cause damage during useHarm to human body.
★Can be used in dangerous and explosive environments without causinginto a spark.In addition, the low extensibility of the flat belt can reduce the lifting effort.Avoid the beating of the hoisted objects in the industry to avoid impact damage.sameSlings are dye-coded to provide easy confirmation of correct loadThis method fully facilitates hoisting users.
★Flat slings have higher protection against wear and damage.Among the slings used in general hoisting, due to the flat slingIts superior performance makes it have a long working life, but at the same timeThe correct protective cover must also be used during hoisting operations to ensurePrevent the lifting belt from being cut by sharp objects or lifting objects.
★The daily maintenance of the flat lifting belt is very simple.except occasionallyThe sling does not require any cleaning other than cleaning it in water with detergent.Maintenance, lifting straps have very good resistance to corrosion and areHydrocarbonic acid and most chemical solutions or chemicals have a highresistance, but for strong acid or alkali, the lifting belt may because some damages.
Technical parameters
Product ID | load lbs | Approximate thickness in | Approximate width (in) | Minimum length ft | Maximum length ft | Annular length in | Weight (lbs/ft) | ||||
5:1 | 6:1 | 7:1 | 5:1 | 6:1 | 7:1 | ||||||
FTB08-02 | 4409.25 | 0.59 | 0.98 | 0.98 | 1.18 | 0.04 | 3.94 | 15.75 | 0.75 | 0.99 | 1.08 |
FTB08-04 | 8818.49 | 0.59 | 1.97 | 1.97 | 2.36 | 0.05 | 3.94 | 19.69 | 1.41 | 1.72 | 1.79 |
FTB08-06 | 13227.74 | 0.59 | 2.95 | 2.95 | 3.54 | 0.05 | 3.94 | 23.62 | 2.29 | 2.60 | 2.73 |
FTB08-08 | 17636.98 | 0.59 | 3.94 | 3.94 | 4.72 | 0.06 | 3.94 | 27.56 | 2.95 | 3.09 | 3.66 |
FTB08-10 | 22046.23 | 0.59 | 4.92 | 4.92 | 5.91 | 0.06 | 3.94 | 31.50 | 3.64 | 3.79 | 4.48 |
FTB08-12 | 26455.47 | 0.59 | 5.91 | 5.91 | 7.09 | 0.07 | 3.94 | 35.43 | 4.30 | 4.48 | 5.09 |
FTB08-16 | 35273.96 | 0.59 | 7.87 | 7.87 | 9.45 | 0.08 | 3.94 | 37.40 | 4.98 | 5.73 | 6.11 |
FTB08-20 | 44092.45 | 0.59 | 9.84 | 9.84 | 11.81 | 0.09 | 3.94 | 39.37 | 6.55 | 7.32 | 7.83 |
FTB08-24 | 52910.94 | 0.59 | 11.81 | 11.81 | - | 0.09 | 3.94 | 39.37 | 8.51 | 9.26 | 9.79 |