Availability: | |
---|---|
Quantity: | |
Electrician's rope-type double safety belt with a safety rope. Product purpose and characteristics:
1. Electrician safety belt: It is suitable for work under the pole of electricians, electrical workers, landscaping workers, and other professions.
2. Full body stable belt: practical for industries such as creation, shipbuilding, and equipment.
3. Anti fall and shock safety belt: practical for climbing, leisure, and sports. A danger zone for preventing personal fall outside the climbing process.
4. Easy to use, safe and reliable.
5. Adjust the buckle according to the body's needs.
6. Low strength, wear-resistant, moldy resistant, and durable.
Individual protective equipment used to prevent high-altitude workers from falling or to safely hang them after falling. According to different application conditions, it can be divided into the following three categories:
1. A safety belt for pole work that binds the human body to the vicinity of a fixed structure through ropes or straps surrounding it, allowing the operator's hands to perform other operations.
2. Zone restraint safety belts are used to constrain the range of activity of workers and prevent them from reaching areas where falling may occur.
3. The safety belt that is used to hang the operator when working at height or when a person falls from a height.
Safety belt precautions
1. The usage period of seat belts is usually 3-5 years, and any abnormalities should be invalidated early.
2. The waist belt, safety belt, and rope of the safety belt should have sufficient mechanical strength, the raw materials should have wear resistance, and the snap ring (hook) should have a secure device. Buffers should be added for safe belts and ropes with a length of more than 3 meters.
3. Before using the seat belt, a visual inspection should be conducted: (1) the components are intact, without missing or damaged; (2) The rope and braid shall be free from brittle cracks, broken strands, or kinks; (3) Metal accessories shall be free from cracks, welding defects, and severe corrosion; (4) The bite of the hook tongue of the hook is flat and not misaligned, and the equipment is intact and reliable; (5) The rivet has no significant deviation and has a flat surface.
4. The seat belt should be fastened to a sturdy object, and it is prohibited to hang it on moving or unstable objects. Do not tie at sharp edges. Seat belts should be hung high and tied parallel, and it is prohibited to hang low and use high.
5. When working on the tower, the backup maintenance rope of the safety belt should be tied to a safe and sturdy component (depending on the specific task of live working, whether to tie the back safety rope or not), and the backup maintenance should not be lost.
6. The various components on the seat belt must not be arbitrarily removed
7. The service life of the seat belt is 3-5 years, and any abnormalities should be invalidated early
During the application process, attention should also be paid to inspections, and experiments should be conducted once every six months to one year. Request that the main component is not damaged, if any damage or transformation is found
Electrician's rope-type double safety belt with a safety rope. Product purpose and characteristics:
1. Electrician safety belt: It is suitable for work under the pole of electricians, electrical workers, landscaping workers, and other professions.
2. Full body stable belt: practical for industries such as creation, shipbuilding, and equipment.
3. Anti fall and shock safety belt: practical for climbing, leisure, and sports. A danger zone for preventing personal fall outside the climbing process.
4. Easy to use, safe and reliable.
5. Adjust the buckle according to the body's needs.
6. Low strength, wear-resistant, moldy resistant, and durable.
Individual protective equipment used to prevent high-altitude workers from falling or to safely hang them after falling. According to different application conditions, it can be divided into the following three categories:
1. A safety belt for pole work that binds the human body to the vicinity of a fixed structure through ropes or straps surrounding it, allowing the operator's hands to perform other operations.
2. Zone restraint safety belts are used to constrain the range of activity of workers and prevent them from reaching areas where falling may occur.
3. The safety belt that is used to hang the operator when working at height or when a person falls from a height.
Safety belt precautions
1. The usage period of seat belts is usually 3-5 years, and any abnormalities should be invalidated early.
2. The waist belt, safety belt, and rope of the safety belt should have sufficient mechanical strength, the raw materials should have wear resistance, and the snap ring (hook) should have a secure device. Buffers should be added for safe belts and ropes with a length of more than 3 meters.
3. Before using the seat belt, a visual inspection should be conducted: (1) the components are intact, without missing or damaged; (2) The rope and braid shall be free from brittle cracks, broken strands, or kinks; (3) Metal accessories shall be free from cracks, welding defects, and severe corrosion; (4) The bite of the hook tongue of the hook is flat and not misaligned, and the equipment is intact and reliable; (5) The rivet has no significant deviation and has a flat surface.
4. The seat belt should be fastened to a sturdy object, and it is prohibited to hang it on moving or unstable objects. Do not tie at sharp edges. Seat belts should be hung high and tied parallel, and it is prohibited to hang low and use high.
5. When working on the tower, the backup maintenance rope of the safety belt should be tied to a safe and sturdy component (depending on the specific task of live working, whether to tie the back safety rope or not), and the backup maintenance should not be lost.
6. The various components on the seat belt must not be arbitrarily removed
7. The service life of the seat belt is 3-5 years, and any abnormalities should be invalidated early
During the application process, attention should also be paid to inspections, and experiments should be conducted once every six months to one year. Request that the main component is not damaged, if any damage or transformation is found